XLPE Insulated Copper Tape Screened Steel Tape Armoured PE Sheathed Control Cable
Copper Conductor XLPE Insulated Copper Tape Screened Steel Armoured PE Sheathed Control Cable (KYJYP2-23) is mainly used for system connection wire of control,signal,protection or measuring for rated voltage up to and including 450/750V.
GB/T,JB/T,IEC,BS,DIN,ICEA up on request.
Rated Voltage (Uo/U)
CU/XLPE Insulation/PE Inner Sheath/Copper Tape Screened/Steel Tape Armoured/PE Outer Sheath
Preferred Number of cores:
The conductors shall comply with the requirement given in IEC 60228 for class 1 or 2.
– class 1 for solid conductors;
– class 2 for stranded conductors.
Cross-linked Polyethylene XLPE according to IEC
PE(Polyethtlene) according to IEC
Other special application cable can be provided upon requests:
Fire-resistant,Flame-retardant,Low-halogen,Non-halogen,Low-fume,Low-smoke,as well as acid-alkali-proof,High temperature resistant,Termite and Rodent resistant, Water proof series and so on.
Maximum conductor temperature in normal use: 90℃
Ambient temperature under installation shall not be below 0℃
Max.temperature of conductor under short circuit-(Max.Duration 5 sec.)
Preferred Permissible bending radius
For Armoured XLPE insulated cable not less than: 12 times of cable diameter
|Nominal Cross Sectional Area(mm²)||No. of Cores||Class of Conductor||Max.D.C.Resistance at 20℃(Ω/km):Plain||Max.D.C.Resistance at 20℃(Ω/km):Metal-coated|