High Temperature Wire
High Temperature Wire can keep a good physical and mechanical properties and electrical properties when temperature at 200℃ or bellow.It has good performance of solvent resistance, corrosion resistance, high temperature resistance.It is suitable in bad conditions such as high temperature,for loop of distribution network, industrial device, control loop and signal transmission for rated voltage 200℃ and bellow.
Enterprise Standards,IEC,BS,ASTM and etc. upon request.
Up to and including 0.6/1KV
Permissible Max.continous operating temperature of conductor
Silicon rubber insulated 180℃,fluoroplastic insulated 200℃.
Ambient temperature of insulation
Not less than 0℃
Permissible bending radius
Not less than 12 times of cable diameter for non-armoured cable or screened flexible cable
Not less than 15 times of cable diameter for armoured cable or copper tape screened cable
Power cable for rated voltage 0.6/1KV, Wire, Control cable, Measuring cable for rated voltage at 0.6/1KV and bellow.
Product drawings. Conformance to RoHS (Restriction of the use of Hazardous Substances) is determined and confirmed.
MAIN TECHNICAL CHARACTERISTIC OF CABLE
1.The D.C resistance at 20℃ of conductor should conform to GB/T 3956.
2.The cable should withstand 300V voltage test for 5 minutes.
3.The fire-retardant and fire-resistant cable shoule be made firing tests regulated in GB/T 19666
|Series F||Fluoroplastic insulated series|
|Series G||Silicon rubber insulated series|